• Android
  • iOS

To configure the smart device so that it reports the current time to the camera, open the tab and select (on) and (on) for Auto link > Auto link and Clocks respectively.

Note that synchronizing the camera clock with the smart device may require additional settings on the camera; see the camera manual for details.

  1. Tap Auto link in the tab.

  2. Tap the Auto link switch to (on).

  3. Tap Clocks.

  4. Tap Clocks to on ().

  5. Tap to return to the previous display.

  6. Tap Done to exit to the tab.

“Foreground” Selected for “Auto Link” > “Link Mode” in the Tab

  • Clock synchronization only applies when the SnapBridge app is displayed (running in the foreground) on the smart device. Clock synchronization will be suspended while the app is running in the background.
  • Enabling Location data automatically enables Clocks. Clocks cannot be disabled while Location data is enabled.

To configure the smart device so that it reports the current time to the camera, open the tab and select (on) and (on) for Auto link > Auto link and Clocks respectively.

Note that synchronizing the camera clock with the smart device may require additional settings on the camera; see the camera manual for details.

  1. Tap Auto link in the tab.

  2. Tap the Auto link switch to (on).

  3. Tap Clocks.

  4. Tap Clocks to on ().

  5. Tap to return to the previous display.

  6. Tap Done to exit to the tab.

“Foreground” Selected for “Auto Link” > “Link Mode” in the Tab

  • Clock synchronization only applies when the SnapBridge app is displayed (running in the foreground) on the smart device. Clock synchronization will be suspended while the app is running in the background.
  • Enabling Location data automatically enables Clocks. Clocks cannot be disabled while Location data is enabled.